CUAV NEW NEO 3X GPS Module Ublox M9N GNSS for Drone
Couldn't load pickup availability
NEO 3X GPS Features:
1–Ublox M9N satellite receiver, accuracy up to 0.7m
2–Support Beidou, Galileo, Glonas, GPS four satellite systems
3–Built-in F4 Processor, with a 100 MHz Cortex®-M4 core supporting floating-point arithmetic units
4–IP66 Dustproof And Waterproof
| Weight | 0.5 kg |
|---|---|
| Dimensions | 10 × 10 × 5 cm |
| MUC |
STM32F412 |
| Protocol |
DroneCAN |
| Compass |
RM3100 |
| Barometer |
ICP-20100 |
| GNSS receiver |
Ublox M9N |
| Number of concurrent GNSS |
4 |
| Horizontal accuracy |
1.5m |
| Number of satellites(MAX) |
32+ |
| Size |
67x67x21.2mm |
| Weight |
46g |
Product Introduction:
NEO 3x build in M9N receiver with concurrent reception of 4 GNSS that can adapt to multiple harsh environments. Designed with IP66 standard, it is sealed against dust and rain. It has STM32F4 series processor, ICP2100 barometer, ublox M9N module and RM3100 industrial compass. It supports CAN bus communication based on DroneCAN protocol, and the farthest communication distance can reach 1.5m.
Product Parameters |
|
| MCU | STM32F412(32 Bit Arm® Cortex®-M4, 100MHz, 512KB FLASH, 256KB RAM) |
| Protocol | DroneCAN |
| Compass | RM3100 |
| Barometer | ICP-20100 |
| Satellite Receiver | ublox M9N |
| Frequency Band | GPS：L1C/A GLONASS：L10F BDS：B1I GALILEO：E1B/C |
| Number of Concurrent GNSS | 4 |
| Horizontal | 1.5m |
| Accuracy | (Highest measured value is 0.7m) |
| Number of Satellites(MAX) | 32+ |
| Acquisition | Cold start：24s Hot start：2s Aided start：2s |
| Nav. update rate | 5Hz(default)，25Hz(MAX) |
| Sensitivity | Tracking & Nav： -167dBm Reacquisition：-160dBm Cold start：-148dBm Hot start：-159dBm |
| Protection Level | IP66 |
| Operating Voltage | 4.7 ~ 5.2V |
| Operating Temperature | -10 ~ 70℃ |
| Size | 67.0 × 67.0 × 21.2mm |
| Weight | 46g(Cable Excluded) |
