please contact customer service for the stock availability
CUAV V5+ Features:
1–FMUv5 hardware standard, more advanced and stable than FMUv3
2–Built-in shock absorption
3–Support RTK centimeter-level GNSS module
4–Multi-sensor redundant design
5–Full model support
6–Modular design, support custom baseboard
| Weight | 1 kg |
|---|---|
| Dimensions | 30 × 20 × 10 cm |
| V5+ Controller |
V5+ Controller/ please contact customer service for the stock availability, V5+ & NEO 3 GPS/please contact customer service for the stock availability, V5+ & NEO 3 pro GPS/ please contact customer service for the stock availability, V5+ & NEO 3X GPS/ please contact customer service for the stock availability |
| Tool Supplies |
Assembled class |
| Size |
85.5*42*33mm |
| Technical parameters |
KV1100 |
| For Vehicle Type |
Airplanes |
| Four-wheel Drive Attributes |
Assemblage |
| Power |
Battery |
| Scale |
1:5 |
Introduction:
V5+ is a premium controller designed by the CUAV and PX4 teams and manufactured by CUAV. Based on the Pixhawk FMU v5 design standard, perfectly compatible with PX4 and ArduPilot firmware. Its modular design allows users to customize the baseboard.
Main Parameter |
|
| Main FMU Processor | STM32F765 (32 Bit Arm Cortex -M7, 216MHz, 2MB FLASH, 512KB RAM) |
| IO Processor | STM32F100 (32 Bit Arm Cortex -M3,24MHz, 8KB SRAM) |
Sensors |
|
| Accelerometer | ICM-20602 / ICM-20689 / BMI055 |
| Gyroscope | ICM-20602 / ICM-20689 / BMI055 |
| Magnetometer | IST8310 |
| Barometer | MS5611 |
Interfaces |
|
| UART | 5 |
| I2C | 4 |
| SPI | 1 |
| CAN | 2 |
| ADC | 2 |
| PWM | 8 ~ 14 PWM outputs (6 from IO, 8 from FMU) |
| DSM/SBUS/RSSI | 1 |
| PPM IN | 1 |
| Power Interface | 2 |
| Safety Switch | 1 |
| DEBUG / F7 SWD | 1 |
| USB | 1 (Type-C) |
| TF slot | 1 |
| Rated Voltage | 4.5 ~ 5.5 V |
| USB Voltage | 5V ± 0.25 V |
| Servo Voltage | 0 ~ 36 V |
| Working Temp | -20 ~ 85℃ |
| Size | 85.5 × 42.0 × 33.0mm |
| Weight | 91g |
