Skylark Aerial Mapping and Surveying VTOL Drone

Skylark Aerial Mapping and Surveying VTOL Drone

Image
  • Order within
Available: In Stock
$300.00
Successful pre-order.Thanks for contacting us!
Wishlist Compare

Skylark VTOL Drone is a aerial mapping and surveying VTOL platform,it is easy to install and take apart, also it is made of the honeycomb kevlar with fiber glass and carbon fiber material which make it very strong and durable. 

the fuselage is made of a large diameter Japanese 3k carbon fiber tube, as following photo:

the frame has pre-installed XT90 antispark power connectors, one is for lifting motors, and the another is for fixed wing motor.

the frame also inculdes the battery bay, it can hold two type of batteries, (18650 li ion batteries pack for fixed wing, and 5000mAh 6S lipo for the lifting motors).

the battery bay is made for easily charging and powering the UAV, also connect to the UAV.

there is enough space for installing the autopilot and telemtry in the center of the wings., also the air sensor tube is also pre-install on the frame. 

there is a heat sink design for ESC for the pushing motor at the tail, so the ESC can be installed inside of fuselage without overheating during the flight.

the lifting motor mounting sits has mounting holes; it does not like another composite material frames, so that it is not required of drilling holes for mounting motors.

the camera bay is detached the fuselage, so it can be design as 3-Axis gimbal camera bay with inspection and monitoring 30X or thermal cameras.As well as mapping cameras.



 

Skylark VTOL Mapping Drone Specifications:

Wingspan: 2750mm

fuselage Length: 1400mm

Flight Time: 1.5-2 hours

Max Takeoff Weight: 11kg

Max Airpeed: 33m/s

Cruising Airspeed:22m/s

Max Payload weight: 2kg

Max Wind Resistance: 50 km/s

 

You purchase versions as following:

1). Frame only

just frame of Skylark VTOL UAV without the hard traveling case

2). Frame with Traveling Case

frame with traveling case without any electrionics

3). PNP with Traveling Case

Frame with traveling case, and all motors and propellers and ESC also Servo installed and tested, users need to install autopilot themselves.

4). RTF with Traveling Case

Frame with traveling case, and all motors and propellers and ESC also Servo as well as autopilot (Pixhawk 2 Cube with here2 GPS) and data telemetry, and Futaba Radio Controller. We also Test it and make sure it is ready to fly once customers recieve it.

 5). RTF PPK Completed Version 

Frame with traveling case, and all motors and propellers and ESC also Servo as well as autopilot (Pixhawk 2 Cube with here2 GPS) and data telemetry, and Futaba Radio Controller, and emlid Reach M+ with emlid Reach RS+ for base. We also Test it and make sure it is ready to fly once customers recieve it.

6). Traveling case

Just the traveling hard case for the plane

***Only PNP and RTF Version inculdes the 3-Axis Camera Gimbal.***

**We will provide the Assembling helps (including choosing propulsion system depends on your needs) and pixhawk RTF parameters file to any customer who buy our Frame and PNP version.**

Skylark VTOL Drone is a aerial mapping and surveying VTOL platform,it is easy to install and take apart, also it is made of the honeycomb kevlar with fiber glass and carbon fiber material which make it very strong and durable. 

the fuselage is made of a large diameter Japanese 3k carbon fiber tube, as following photo:

the frame has pre-installed XT90 antispark power connectors, one is for lifting motors, and the another is for fixed wing motor.

the frame also inculdes the battery bay, it can hold two type of batteries, (18650 li ion batteries pack for fixed wing, and 5000mAh 6S lipo for the lifting motors).

the battery bay is made for easily charging and powering the UAV, also connect to the UAV.

there is enough space for installing the autopilot and telemtry in the center of the wings., also the air sensor tube is also pre-install on the frame. 

there is a heat sink design for ESC for the pushing motor at the tail, so the ESC can be installed inside of fuselage without overheating during the flight.

the lifting motor mounting sits has mounting holes; it does not like another composite material frames, so that it is not required of drilling holes for mounting motors.

the camera bay is detached the fuselage, so it can be design as 3-Axis gimbal camera bay with inspection and monitoring 30X or thermal cameras.As well as mapping cameras.



 

Skylark VTOL Mapping Drone Specifications:

Wingspan: 2750mm

fuselage Length: 1400mm

Flight Time: 1.5-2 hours

Max Takeoff Weight: 11kg

Max Airpeed: 33m/s

Cruising Airspeed:22m/s

Max Payload weight: 2kg

Max Wind Resistance: 50 km/s

 

You purchase versions as following:

1). Frame only

just frame of Skylark VTOL UAV without the hard traveling case

2). Frame with Traveling Case

frame with traveling case without any electrionics

3). PNP with Traveling Case

Frame with traveling case, and all motors and propellers and ESC also Servo installed and tested, users need to install autopilot themselves.

4). RTF with Traveling Case

Frame with traveling case, and all motors and propellers and ESC also Servo as well as autopilot (Pixhawk 2 Cube with here2 GPS) and data telemetry, and Futaba Radio Controller. We also Test it and make sure it is ready to fly once customers recieve it.

 5). RTF PPK Completed Version 

Frame with traveling case, and all motors and propellers and ESC also Servo as well as autopilot (Pixhawk 2 Cube with here2 GPS) and data telemetry, and Futaba Radio Controller, and emlid Reach M+ with emlid Reach RS+ for base. We also Test it and make sure it is ready to fly once customers recieve it.

6). Traveling case

Just the traveling hard case for the plane

***Only PNP and RTF Version inculdes the 3-Axis Camera Gimbal.***

**We will provide the Assembling helps (including choosing propulsion system depends on your needs) and pixhawk RTF parameters file to any customer who buy our Frame and PNP version.**